VHD1.0 - Mid High/Down-fill Enclosure


Mid High/Down-fill Enclosure

This mid high enclosure features a single 12” low mid, trans coil woofer, an 8” mid range and the same compression driver as the VHD2.0 on a wide angle 110° horizontal by 40°vertical horn.  The rear of the box has been angled for use as a downfill with the VHD2.0. Alternatively as a stand-alone box up to three VHD1.0s can be powered from a single VHD2000 amplifier. Like the VHD2.0, VHD1.0 is available in left and right versions for downfill applications. Designed to be powered as a slave from the VHD2.0 cabinet or directly from the VHD2000 amplifier, all equalization, set up and level are preset providing a plug and play solution for large scale touring and high quality installation.

  • Professional Baltic birch construction with wear-resistant polymer coating.
  • Cut away down angle for correct positioning when flown underneath VHD2.0 cabinet.
  • Four pieces of fly-track (two per side).
  • Very High Definition audio reproduction.
  • 134dB sustained output, 137dB peak.
  • Controlled wide dispersion 110° x 40° Mid/High horn with a flat response to 180°.
  • Revolutionary 3” (76mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug and neodymium magnetic structure for higher output, exceptionally low distortion and extended frequency response.
  • 8” Trans-Coil midrange driver, with a 3” (76mm) voice coil and neodymium magnet for increased control and output with reduced distortion and weight. Horn loaded 12” mid-bass driver with 3”(76mm) inside/outside, epoxy baked, high temperature voice coil assembly and neodymium magnetic structure.
  • Three way active requirement - 1000W from the VHD 2000 providing 600W for the 12” Low Mid, 300W for the 8” Midrange and 100W for the High Frequency.
  • Proprietary side handle design (four) for simplified handling and carrying.
  • High impact low friction feet, allowing lock- in to other VHD cabinets and easy cabinet movement.
  • Front locking aluminium VHD wheel boards with wraparound hardwood bumpers.
  • Weather proofing option and special paint finishes available on request.

System Acoustic Perfomance

Max SPL Long-term 134dB
Max SPL Peak 137dB
-3dB Response 100Hz ÷ 22kHz
-10dB Response 85Hz ÷ 30kHz
Full Range mode -3dB Response 65Hz ÷ 22kHz
Crossover Point 100Hz, 450Hz, 2.2kHz

High Frequency Section

Acoustic Design Horn Loaded
High Horn Coverage Horizontal / Vertical 110° x 40°
High Frequency Amplifier Requirement 100W (VHD200 amp.)
Throat Exit Diameter / Diaphragm Size 1.4" / 3.0"
Diaphragm Material Nitride Titanium
Magnet Type Neodymium

Mid Range Section

Acoustic Design Horn Loaded
Mid Horn Coverage Horizontal / Vertical 110° x 40°
Midrange Amplifier Requirement 300W (VHD2000 amp.)
Woofer Size / Voice Coil Diameter / Design 8" / 3.0" / Trans Coil
Diaphragm Material Epoxy Reinforced Cellulose
Magnet Type Neodymium

Mid-Bass Section

Acoustic Design Horn Loaded
Mid-bass Amplifier Requirement 600W (VHD2000 amp.)
Woofer Size / Voice Coil Diameter / Design 2x 12" / 3" / Inside Outside
Diaphragm Material Epoxy Reinforced Cellulose
Magnet Type Neodymium

Speaker Input

Speaker Input EP6 male

Speaker Output

Speaker Output EP6 female


Cabinet Material Baltic birch
Handles 4
Color "Orange peeled" Matt Black or any RAL

Physical Dimensions

Height 660mm (25.98")
Width 700mm (27.55")
Depth 495mm (19.48")
Weight 45kg (99lbs)